Wolman Woodlife CreoCoat Wood Preservative is for use on below-ground, ground contact or water contact wood installations, especially non-pressure-treated lumber, to protect the structural integrity. Prevents termite and other insect attack, mold, mildew and other fungi attack, and dimensional change caused by water absorption.
- Color: Black
- Base Type: Water-Based
- Product Type: Wood Preservative
- Container Size: 1 gal
- Indoor or Outdoor: Outdoor
- Full Cure Time: 24 hr
- Time Before Recoating: 60 min
- Color Family: Black
- VOC Level: 320 g/L
- Paintable: Yes
- Coverage Area: 200 sq ft
- Transparency: Semi-Transparent
- Form: Liquid
- Container Type: Can
- Collection Type: CreoCoat
- EPA-registered, insecticidal preservative
- Prevents termite damage, rot and decay
- Inhibits surface growth of fungal organisms: mold, mildew and staining fungi
- Imparts a solid black finish when applied as directed
For Best Results
Preparation is key to maximizing the product’s performance To properly prepare your surface, use either the Wolman™ DeckStrip® or DeckStrip® ASR, then clean with Wolman™ DeckBrite™ or Deck & Fence Brightener.
If wood is brand new and intended for outdoor installation and exposed to weather conditions for 30 days or less, a “splash test” should be performed to determine if there is any surface barrier present which would repel a new coating. Sprinkle a few drops of water on several areas of the surface to be coated. If the water is absorbed rapidly, the surface is ready to be finished with WOODLIFE® CreoCoat®. If the water beads are not absorbed into the wood, a surface barrier exists and must be removed. Apply Wolman® DeckStrip® or Wolman® Deck & Fence Brightener and then test again. Regardless of the surface’s age or condition, failure to follow proper preparation methods will result in poor adhesion and/or possible coating failure.
Technical Data Sheet
