Fiberglass Mosaic Tile Mesh Sheet 1m x 3m.
When you’re making a wall mosaic do you find your mosaic tiles slide down the wall as they dry? Trying to glue each individual tile directly onto the wall can be very difficult, but there is an easier way.
Using our Fibreglass Mosaic Tile Mesh, you can create your design on a flat surface before glueing the entire sheet to the wall. This allows you to work at a table and create detailed designs that would otherwise be all but impossible.
Some tips to remember when working with mosaic tile mesh:
- Tape a piece of baking paper to the surface of your work table so that you don’t accidentally glue the mosaic tile mesh to the table. Baking paper is sold in most supermarkets.
- Work in small sections, such as 30cm x 30cm. Don’t try to create one sheet of mesh as big as your total mosaic. Remember, it is much easier to match up smaller sheets into the overall design than it is to try to handle one big sheet with 20kg of tile falling off it.
- It may be easier to paint the glue on the mesh and then pick the mesh up and move it to a fresh location on your work bench before placing the tiles on it to avoid getting too much glue on the backs of the tiles.
Please Note: Care should be taken when using fibreglass mesh, as the fibres may cause irritation to skin, eyes and lungs. We recommend handling the mesh with gloves. Not suitable for children.
